Connecting to WiFi

NOTE: WiFi is optional but recommended. By turning on the WiFi, AppliedVR will collect the information outlined in our privacy policy, which is available here: www.appliedvr.io/privacy-policy.

Before Connecting to WiFi:

1. Have your WiFi network name and WiFi password on hand.

2. If possible, have a friend or family member read you the steps and your password, so you can focus on what's going on in your device.

To connect to WiFi:

1. Use GAZE to focus and activate the SETTINGS icon at the lower center of the Home Menu.

2. Use GAZE to focus and activate the CONNECT TO WiFi button on the left panel of the menu.

3. A list of WiFi networks will appear on the right panel of the menu. If you don’t see your network, make sure to scroll down by using GAZE to focus on the arrows to the right.

Once your network is identified, use GAZE to focus on your network name to start the connection process.

NOTE: If you select the wrong network, you can GAZE at the “Return” arrow to go back to the list of WiFi networks.

NOTE: Public networks (the types of networks that may be found at hotels or hospitals) are not supported.

4. Enter password and connect.

a. Enter password. Enter one character at a time by gazing at each character. Hold your GAZE to
confirm each character of your password.

You will see the character added to the password bar right above the keyboard. To delete a character, simply GAZE at the back arrow. If you need a special character (%&!), select that on the lower left of the keyboard.

b. Use GAZE to focus on the SUBMIT button directly below your password to start the connection process.

5. Connecting to WiFi

a. As your WiFi connects, you can see the process on your screen along with any additional information necessary to completing WiFi setup.

b. Once you have successfully connected, you will be automatically returned back to the home menu.

6. If there is a need to check your WiFi connection after initial setup, you can go to CONNECT TO WIFI in the settings menu. A connected network will have a “check mark” to the left of the WiFi network name.